Post
Topic
Board Hardware
Re: AMT 1.2THs miner first impressions/review (WIP)
by
opieum2
on 12/01/2015, 18:51:29 UTC
I would recommend selling it and replacing it with a bitmain S5 and S3.. for the cost of the hardware parts in there you could sell it for an s5 and an s3 and come out with 1.4-1.5 which is better than this unstable garbage they shipped us. That said there are links for the image. If those are down, someone can post a new mirror up.

I posted mega.co links that should still work. Check OP or second post. If those are down I will have to look for the image files as they are archived in cold storage for the time being until they are required. In obvious retaliation against the community AMT decided to pass the buck of support off to its customer/investors. There is a post for that in one of the various other AMT threads.



Hi. where can I get the img file firmware for amt 1.25 ths system. My amt web site no longer showing me the home or setup link. Thanks



PART 2:

Reserved for power consumption, hashing stats

Initial Hashing stats. I will post a more sustained average from the miner later on this is just to start.


What the pool reports after about 10 minutes. This is on BTCguild. I will move the miner over to elgius for more accurate stats.



While there is a 12 hour average here. This is pretty much what it looks like all the time. I think the 1.27Ths number is fixed and always in there. No matter what I do that number will not change. The pool reports



This is about the norm. Usually a but lower at around 950 most of the time. The performance is not consistent and this is actually the best it can do. Looks like other people who reported a 10 percent rejection rate. CGMINER stats coming soon.