Quote from: hackwienix on July 10, 2012, 05:59:07 PM

Abend

Ich habe ein Problem mit meinem Quad.

Diese Meldung hatte ich früher auch schon, aber mit einem einfachen Ein-/Ausstecken (oder auch 2mal) ging es dann.
Nur jetzt bekomme ich das Board einfach nicht mehr zum Laufen.
Weiß jemand was ich noch versuchen könnte?

Quote

(Re)Scanning bus ...
MAC address: 0004a36e2d07
ztex_ufm1_15y1-04A36E2D07: New device: bitfile=ztex_ufm1_15y1 f_default=200,00MHz f_max=240,00MHz HpC=1.0H
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ...
Warning: High speed FPGA configuration failed, trying low speed mode:Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Trying low speed mode
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
ztex_ufm1_15y1-04A36E2D07: Error configuring FPGA 0: Error uploading bitstream:FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122)
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ...
Warning: High speed FPGA configuration failed, trying low speed mode:Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Trying low speed mode
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
ztex_ufm1_15y1-04A36E2D07: Error configuring FPGA 1: Error uploading bitstream:FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122)
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ...
Warning: High speed FPGA configuration failed, trying low speed mode:Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Trying low speed mode
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
ztex_ufm1_15y1-04A36E2D07: Error configuring FPGA 2: Error uploading bitstream:FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122)
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Retrying it ...
Warning: High speed FPGA configuration failed, trying low speed mode:Error uploading bitstream: FPGA configuration failed: DONE pin does not go high, possible USB transfer errors (INIT_B_HIST=122): Trying low speed mode
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...
Warning: Error uploading bitstream: FPGA configuration failed: DONE pin does not go high (size=4220313 , 0 bytes got lost; checksum=3 , should be 3; INIT_B_HIST=122): Retrying it ...

...und so weiter

Ich hatte das Problem auch mit einem Board, dachte schon es wär kaputt. Bei einem letzten Versuch vor ich Chefnet schreiben wollte hab ich nochmal alle Lüfter neu drauf gemacht und die überflüssige Wärmeleitpaste weggemacht (hatte einiges rausgedrückt, hab aber die nichtleitende die dabei ist verwendet). Dann gings plötzlich. Das gleiche hatte ich aber schon ein paar mal gemacht und da hat es nichts geholfen, aber ein Versuch ist es wert.

Was mir auch aufgefallen ist, ist dass ich den gleichen Fehler sehr häufig bekomme wenn ich das USB Kabel anschließe während das Board schon Strom hat. Seit ich die Kabel andersrum einsteck kommt der Fehler praktisch nicht mehr.