Quote from: adaseb on January 21, 2015, 10:17:24 AM

Quote from: dogie on January 21, 2015, 09:58:28 AM

Quote from: adaseb on January 21, 2015, 08:11:48 AM

Quote from: kabopar on January 21, 2015, 07:54:20 AM

Quote from: adaseb on January 21, 2015, 07:44:08 AM

Hello

I bought a used Antminer S3 but the user and password "root" doesn't work. The previous owner must of changed it.

Anyway to reset it?

Check Dogie's guide at https://bitcointalk.org/index.php?topic=702653. There is a reset switch accessible from the front panel, next to the 2 LEDs and Ethernet connector. You power it up, press the reset button through the hole using a paper clip or similar thin object, hold it for 5-10 secs. This will reset it to factory defaults, including the password.

Cheers

Are the lights suppose to change when pressing the button? They all stay lite, like pressing it does nothing.

Yes they are, suggests the unit is on a firmware where the reset button's functionality is broken. While you wait for your seller to reply to your password email, you can SSH and control them from there. This will at least get you up and running.

1) SSH to S5, Login root/root
2) Type "screen -r". Wait for all the messages to go through.
3) Type "P" to enter Pool Management.

the user and password root doesn't work.

Code:

ssh root@YOUR.MINER.IP
Password: root

Should work...