Quote from: tuxxilla on February 02, 2015, 09:24:05 PM

Step-by-step guide to setup AeroMe on your Raspberry Pi

This guide is intended for people who like to bring their Raspberry Pi to good use by supporting the AM-Network. My own Raspberry Pi Model B+ is currently staking AeroMe:

My Pi@Work: http://am.blockexplorer.cc/a/ASwRfnyN5E

Setup instructions

1.	Get Raspbian
	Get the latest Raspbian version: http://downloads.raspberrypi.org/raspbian_latest. Install the image according to these instructions: http://www.raspberrypi.org/documentation/installation/installing-images/README.md.
2.	Download and build the sources
	Connect to your Pi via SSH. Download all dependencies required to build AeroME: Code: sudo apt-get install build-essential sudo apt-get install libssl-dev sudo apt-get install libdbdev sudo apt-get install libdb-dev sudo apt-get install libboost-all-dev sudo apt-get install libqrencode-dev sudo apt-get install libsnappy-dev Download the latest AeroMe sources: Code: git clone https://github.com/aeromasterdev/am-aerome Build LevelDB: Code: cd am-aerome/src/leveldb make make libmemenv.a Do something else while waiting for compile to finish... Build AeroMe client (headless): Code: cd .. make -f makefile.unix Do something else while waiting for compile to finish... That's basically it. You should have compiled a working binary of AeroME client. Executing help will list all available commands: Code: ./aeromed help addmultisigaddress <'["key","key"]'> [account] addredeemscript [account] backupwallet checkwallet createrawtransaction [{"txid":txid,"vout":n},...] {address:amount,...} decoderawtransaction decodescript dumpprivkey ...
3.	Start the daemon and transfer some funds
	Create the config file at: "~/.aerome/aerome.conf" Code: rpcuser=aeromerpc rpcpassword=someRandomGeneratedPasswordString Start the daemon via: Code: ./aeromed --daemon aerome server starting Use command "listreceivedbyaddress" to show your default address Code: ./aeromed listreceivedbyaddress 0 true [ { "address" : "ASwRfnyN5EcZu4bjezVxqSHo4BNPRiKQgo", "account" : "", "amount" : 0, "confirmations" : 0 } ] After sending some funds, the client will start staking. You can use "getstakinginfo" to check the current status: Code: ./aeromed getstakinginfo { "enabled" : true, "staking" : true, "errors" : "", "currentblocksize" : 1000, "currentblocktx" : 0, "pooledtx" : 0, "difficulty" : 0.06821837, "search-interval" : 1, "weight" : 2809, "netstakeweight" : 5258795, "expectedtime" : 112327 }
4.	Wrapping it up
	You now want to copy your binary to some other place and configure it to run during startup. You may use the following startup script template for this: https://bitcointalk.org/?topic=965.0 Just adapt executable, paths and user to your needs.

... happy staking

Build instructions??

Woop Woooop!

I was just thinking about setting up a server on digital ocean!

tyvm for this!

Build instructions are always a pain to get perfect haha.