Quote from: tbolt on February 04, 2015, 11:38:40 PM

Quote from: IITravel01 on February 04, 2015, 02:34:45 PM

Quote from: dogie on February 04, 2015, 02:12:20 PM

Quote from: syscooling on February 03, 2015, 02:21:17 AM

Quote from: dogie on February 02, 2015, 10:10:53 AM

Quote from: notlist3d on February 02, 2015, 02:14:10 AM

Quote from: dogie on January 29, 2015, 11:21:44 AM

Quote from: notlist3d on January 29, 2015, 03:18:08 AM

My guess is copper. They have always been very careful to say to use coolant not water. That and it looks a copper "PD360" on their site we got: http://www.syscooling.com/products/Radiators/54.html . The two aluminum radiator's they show selling are much smaller then the one with kit.

I could be wrong if they used a specialty one for miners, but I'm highly guessing its their standard.

Yes, you have to assume its copper or there are copper components. In several points in the listings (all changed by now) there has been a mention of copper on both the radiator and the fittings [internal coating]. You can see within the chamber of the radiator that there is definitely some form of dark orange coating, which may be brass or copper. So tldr, be safe and assume there is copper and aluminium within the same loop.

Any luck finding out what the radiator is made out of?

See below. Suggesting its all aluminium, so the coatings we see must be brass [which is fine].

Quote from: syscooling on February 02, 2015, 07:21:26 AM

The radiator SC-BC1 watercooling kits uses is aluminum.PD360 radator is copper,only PD series radiator is copper.

You see coatings?Could you show me a picture?

Like the picture on your site, its golden in the threads and in the lower chambers. http://www.syscooling.com/products/Radiators/54.html. Looks exactly like my very early batch 1.

Threads looks brass in that pic. to me, also it appears thicker at 45mm (from specs. listed) compared to the one I got that looks closer to 25mm.

That's not the correct Radiator, this is the link to the kit:
http://shop.syscooling.com/goods.php?id=45

and it uses the AT360 radiator.

Right.Batch 2 uses 36S-8,with self-built tubing adapters(G1/4-8),decreases the risk of leaking.