Quote from: McKnight on April 01, 2015, 06:49:34 PM

Quote from: jeffery_dahmer on March 31, 2015, 10:53:56 PM

Quote from: McKnight on March 31, 2015, 10:42:53 PM

Quote from: jeffery_dahmer on March 31, 2015, 09:59:13 PM

Quote from: McKnight on March 31, 2015, 09:33:35 PM

Has anyone ever managed to get an antminer S1 to solo mine? If so how?

i gave up on it. the only way i can see doing it is if you dump the controller board, wire in a cp201 uart to usb bridge and then use bfgminer to detect and over/under clock the chips. you would need 1 bridge to each hash board i believe and with the low hash rate vs the power consumption of the s1, you'd be better off buying the u3 and soloing with that. 7queue,

Code:

https://bitcointalk.org/index.php?topic=863242.0

says he got it to solo mine but i was unable to duplicate his results.

Thanks i'll have a go at this tomorrow, i'll let you know if i've done it and how.

Cool, please do. I really would like to solo with the 4 ant s1's i have sitting here. thanks.

Well i've been trying all day and still can't do it..... Given up now lol, But i did find a couple of U1's so i had those mining earlier but the diff is a little high at the moment and taking ages to find a block. only found 5 blocks in 5 hours.... 4 GH/s

Yeah thats where I was with S1. My old u2's were hashing until yesterday. Doing some maint on my set up and when I'm done I'll put them back on it if the diff isnt too high.