Quote from: Jhawkfan101 on April 27, 2015, 08:59:40 PM

Quote from: michelem on April 27, 2015, 01:41:42 PM

Quote from: Jhawkfan101 on April 26, 2015, 10:50:14 PM

Quote from: michelem on April 25, 2015, 07:09:57 AM

Quote from: Jhawkfan101 on April 24, 2015, 11:21:49 PM

Ok, here is what my log says when I try to run cgminer

[2015-04-21 21:18:05] Started cgminer 4.9.1

[2015-04-21 21:18:05] Loaded configuration file /var/www/minera/conf/miner_conf.json

[2015-04-21 21:18:11] No devices detected!

[2015-04-21 21:18:11] Waiting for USB hotplug devices or press q to quit

[2015-04-21 21:18:11] Probing for an alive pool

[2015-04-21 21:18:11] Pool 1 difficulty changed to 16

[2015-04-21 21:18:11] Pool 0 difficulty changed to 128.0

[2015-04-21 21:18:12] Switching to pool 1 stratum+tcp://multi.ghash.io:3333 - first alive pool

[2015-04-21 21:18:12] Pool 0 stratum+tcp://stratum.mining.eligius.st:3334 alive, testing stability

[2015-04-21 21:18:12] Switching to pool 0 stratum+tcp://stratum.mining.eligius.st:3334

[2015-04-21 21:18:13] Network diff set to 47.6G

[2015-04-24 18:14:36] API running in IP access mode on port 4028 (10)

Still not reading my asicminer tubes.

Well now, it could be useful know your settings... For example, you didn't answer me, did you tried with superuser mode?

Sorry must have missed that question, but yes superuser mode is on. Here are my settings right now. Thank You again for the help!

Last try is looking what the miner is doing while tries to start, so get a terminal window in Minera and try launch this command:

Code:

/var/www/minera/minera-bin/cgminer -c /var/www/minera/conf/miner_conf.json

(stop any running miners)

If you are still getting "No devices found", try to run:

Code:

lsusb

And give us the output

Still no go, here is what I got on the terminal screens

He may need to add some thing in the extra option , which i can't help him with . those thing set up strange .from what Ive used . Zeusminer antminer are pretty easy to set up.

tubes have there own prox etc if I'm not mistaken on top of the controllers you can use with them . i had one once never got it working it right , but it was one of the 30 GH ones way back when .

Also make sure you have the right pool info Ive seen some miners not log in or even work with the pool info wrong, even if it says it's correct .

make sure your asicminer tubes software is set up right . that blue screen behind your miners IP.

OFC I'm guessing at this point

***Only the below pools work directly with Tubes due to a current error in the firmware. Other pools will require the use of a proxy (see next section).***

GHash IO Register!
Code:
Servers : us1.ghash.io with port 3333
User : username.worker - auto creates workers!
Password: anypassword
Slush Register!
Code:
Servers : stratum.bitcoin.cz with port 3333
User : username.worker
Password: password
BTCGuild Register!
Code:
Servers : stratum-lb-usa48.btcguild.com with port 3333
User : username_worker
Password: anypassword
Bitcoin Digger Register!
Code:
Servers : geo.bitcoindigger.com with port 3333
User : username.worker - auto creates workers!
Password: anypassword

and this in the extra options all i could find

--set-device PXY:diff=512 use BFGMINER with that setting i think

not sure if that has anything to do with your problem and driver not loading in minera .