Quote from: d2dtk on June 09, 2015, 06:36:14 AM

My settings won't save if I reboot or turn off since I updated the firmware with Kano's.. Any suggestions?

Check the /config/cgminer.conf
That is where the settings are saved and that directory /config/ and everything below it is a write enabled partition on the SD card.
If it has the wrong file privs not allowing the web interface to write to it that may stop it saving them.
I added changes in some places to override the file privs to attempt to fix that.

To see the SD setup when you login with putty or ssh:
df -h
On my SD it looks like this:

Code:

root@antMiner:~# df -h
Filesystem Size Used Available Use% Mounted on
devtmpfs 240.7M 0 240.7M 0% /dev
/dev/mmcblk0p3 1.6G 470.4M 1.1G 30% /config
/dev/mmcblk0p1 69.5M 50.5M 18.9M 73% /mnt/mmc1