Quote from: XMSK on July 12, 2015, 08:17:09 PM

Quote from: philipma1957 on July 12, 2015, 02:35:44 PM

while the ant miner will draw 355watts on freq 218 or freq 225 that is based on a quality Gold rated psu.

your psu is rated 20 amps per 12 volt rail and 34 amps combined for its two 12volt rails.

If I knew that each pcie wire drew from the separate rail 1 + 2 you may be able to do freq 200. But many times your lower quality psu will use one 12 volt rail for both pcie's and the other 12 volt rail for the motherboard.

I also am pret sure your psu is bronze not gold so it will use 385 watts not 355 watts.

So I am trying to keep you safe by saying try the freq 175 setting not the stock 218 or 225 settings.

If it runs 2 days in a row at freq 175 bump up a little higher.

I mean, so we all clear
the real problem is that the network operated 600-650w was what I have (free energy) do not have to pay for it.

have HP DPS-800gb (1000w too high) 4x pcie Pic

I found a buyer and buy another one
search _ CX600M

for example

i found corsair CMPSU600G Pic good?

or

FSP Raider 750W Pic

If you own 1 S-3+ and you own 1 Hp DPS-800gb you do not need another psu.

Attach the s-3 to the HP DPS-800gb

the s-3+ will only pull 340 to 370 watts from the HP Dps-800gb