Quote from: spiccioli on November 11, 2015, 07:23:24 AM

Quote from: philipma1957 on November 11, 2015, 05:22:14 AM

Quote from: allinvain on November 11, 2015, 05:15:59 AM

I'd like to add that ideally we would prefer that one PSU power 2 miners only, not 2.5, for a load of ~2200 watts. We like to run everything below max capacity and everything in our electrical setup is overspec and loaded up to a maximum of 70 to 80% for safety reasons (not to mention long term reliability).

this is penny foolish and pound wise

ie I like the idea

Well,

I have several PSUs of this kind powering some SP20s, each PSU has 3 powerfull fans which lower total efficiency if underutilized.

At 2.5 Avalons each we should be at 2.5 - 2.6 kW per PSU so at around 90% utilization of the PSU.

Just my 2c.

spiccioli

I suppose they could but are there any issues with multiple psu's power an avalon 6.

we may find 2 ¼ is better then 2 or 2 ½

one avalon 6 would use a pcie from 4 psu's

rather

then one avalon 6 using a pcie from 2 psu's

I think a lot depends on the owner of the avalon 6. If these prove to be real flexible in over clock or under clock and up volt or down volt.