Quote from: TXSteve on November 29, 2015, 04:46:28 PM

Quote from: Searing on November 29, 2015, 07:52:36 AM

Quote from: TXSteve on November 28, 2015, 06:45:07 AM

Quote from: SunnyIgor on November 27, 2015, 11:11:36 PM

if any lawler is interested in kncminer,
not granting warrenty. Please contcat me though pm.
they just waited to reply (about a week ) after one year and said warrenty exprired!
i asked for rma before one year was over.
this is not lawfull and they know it.................

ps. where does one order a ribbin cable if one is lost...

you'll have to make your own, but it's pretty easy and you can use common slip jaw pliers instead of a crimper

just be careful to double/triple check the orientation of the plugs (or order extras)

http://www.pcaccessories.com/shopexd.asp?id=514

http://www.pcaccessories.com/shopexd.asp?id=524

you would not happen to know IF the old mercury/saturn/jupiter ribbon cables are the same? (yeah shorter but still) I have like 4 of these puppies
from the old KNC 550gh Jupiter I could use as a spare on my Titans. Just wondering if anyone knows off hand.

(my setup below. The KNC 550gh Jupiter is now being used as a 'gravity assist device' to keep the miner workbench down)

lostgonzo.imgur.com

Hey searing I like your exhaust fan setup. Where'd you find that shroud to cover the louvers on the outside? I propped my louvers open with a spring so the fan doesn't work as hard. A shroud would help

I added a temp control switch from amazon, but I came up with basically the same setup

here ya go ..I think the hoods are only online at 'Menards' but you can probably get both. I got the below shutter fan at Menards and the hood from the online menards store

https://www.menards.com/main/building-materials/roofing-soffits-gutters/power-vents/canarm-xf-series-knock-down-hood-for-xfs12-r-16-r/static-foundation-vents/canarm-xf-series-knock-down-hood-for-xfs12-r-16-r/p-1444426163562.htm

https://www.menards.com/main/static-foundation-vents/canarm-12-3-speed-xfs-series-exhaust-shutter-fan/p-1444426155930.htm

I got the 12" version. It basically ran all the time in the Summer....they are NOT recommended for basement windows like mine....I kept the brush away in case of spark (never got that dry here) also the shutters don't always close if you shut the fan off..in that they cost me 10 bucks in electric to run a month I did not sweat it..just ate the electric costs (before halving so not an issue lol )

Anyway when I did shut the fan off (like 3x) I had to go out and push shutters shut..just an FYI..probably could have tweaked them to be looser..but did not bother..as you can see from my picture below I really had to have a 'shutter fan' or rain would fall on the miners...In that it was on 24/7 this was not a big deal. And yeah it got warm down there at 2500 watts so it really did need to be on most of the time ..with the push fan below also on mostly this last summer. SO NOTE WITH YOUR THERMOSTAT AND the shutters MAYBE once in a great while NOT shutting (magnetic but still) if you are using the fan in a more sensible place it is not an issue ..my location sucked so just left it on 24/7 and ate 10 bucks a month

I also had this 'pusher" fan at the other end of basement hanging in front of the window to push air in as the shutter fan pushed air out it also was 10 bucks a month electric to run.

the push fan was from Menards but can't find it now...look around for a model near you (if you want such) air king 9318. Anyway paid a bit more for this in that I figure I can use both in the future. They are built well should last. A person could just get both from Amazon. The hood was challenging to find but I see it is still on Amazon. Again paid more for these fans in that I will likely just keep the shutter fan in (what the heck) and can use them both in basement in the future when miners are doorstops.

http://www.amazon.com/Air-King-9318-Industrial-Velocity/dp/B000GGNTU6/ref=sr_1_1?s=home-garden&ie=UTF8&qid=1448861156&sr=1-1&keywords=air+king+9318

Worked well with my 2 Titans in the basement. Pretty Hot summer for Minnesota but it was all about air flow. As you can see from my imgur pages. Also on those pages are the above units installed. Hot air went to ceiling.. I had a great breeze of incoming air with the pusher fan and out the shutter fan it went ..easy pleasy ..no mess no fuss

As a side note. On the shutter fan above the dryer in my pics on lostgonzo.imgur.com once mounted (I used painted plywood and raised with 1 1/4" by 1 1/4" PLASTIC trim I think it was to be higher then the actual vinyl window frame and screws that into wood around vynal basement window frames..thus higher then window and no damage to such with plywood attach and then the plywood went into that not 'ruin' my nice new windows in basement.

As such there is enough room with winter to take off the metal cage in the inside and remove the fan/motor assembly on such and put the pull down vinyl window with handle back in and close such. So it worked out pretty slick. A four bolt remove as you can see from the picture above. So again wtf I probably will just leave it in place the mod for winter is easy to put back.

again here is a pic of my complete setup. you wish to see more (including my 6 cube putty speeds on 2 corsair 1200i psu's and my 2 cube unit on 1 Seasonic 860w both platinum...knock about my imgur site.

If this is too off topic for the thread I'll move it or delete it. But it may be applicable for SOMEONE in Australia or other parts of the world where it is Summer.

But what the heck if I can't show off my 'deluded' "pre-order' (dumb) 'newbie shrine..back when I got it" to KNC on this thread..well where can I post this stuff

(such a cute trusting newbie I was ..drank the KNC kool aid....anyway I've ROI'd plenty so FU KNC .....)

The KNC Jupiter 550gh miner you see on the bottom shelf (metal closet shelves added to fit Menards) and workbench (only like 50 bucks more then other workbenches 180 Sam's club for crying out loud it has a butcher block top) anyway the Jupiter is OFF and being used as a 'gravity assist device to keep miner bench down" people keep asking if I'm still mining with it er NO.
The legs are metal so got 12 buck tap and die set and bolted all the stuff the threads in the frame. (shelves, trip lite euro 220v surge protectors ..saved my ass 3 times in storms...etc)

anyway gonna miss home mining I kinda over did it as you can see above

The 'withdrawl and shakes is gonna be sooooooo bad Sad

Anyway scroll about the Imgur site it is full of Titan related toys (psu switches/tripp lite 220v units/etc)

man I'm gonna miss this bad when it all goes to 'doorstop status' ie 'bricks' Sad