Re: [Minera v0.6.1] Your next mining dashboard - Networked/CPUminer/CGminer/BFGminer
Just started using minera for my 3 gridseed blade pcb's.
At start the system says i got 3 local miners.
But 3minutes later i got 15 :S
hashing at pool says about 9mh/s. so thats ok.
Is this a bug?
Same problem for BFGminer as for Cgminer (cgdmaxlzeus)
from log:
[2015-11-25 22:40:34] GSD 0: Failed to send work
[2015-11-25 22:40:34] GSD 3: Failed to send work
[2015-11-25 22:40:34] GSD 1: Failed to send work
[2015-11-25 22:40:35] Found GSD 4aa at /dev/serial/by-id/usb-STMicroelectronics_STM32_Virtual_COM_Port_48D8685D3031-if00
[2015-11-25 22:40:35] Found GSD 5aa at /dev/ttyACM5
[2015-11-25 22:40:35] Found GSD 6aa at /dev/ttyACM4
At start the system says i got 3 local miners.
But 3minutes later i got 15 :S
hashing at pool says about 9mh/s. so thats ok.
Is this a bug?
Same problem for BFGminer as for Cgminer (cgdmaxlzeus)
from log:
[2015-11-25 22:40:34] GSD 0: Failed to send work
[2015-11-25 22:40:34] GSD 3: Failed to send work
[2015-11-25 22:40:34] GSD 1: Failed to send work
[2015-11-25 22:40:35] Found GSD 4aa at /dev/serial/by-id/usb-STMicroelectronics_STM32_Virtual_COM_Port_48D8685D3031-if00
[2015-11-25 22:40:35] Found GSD 5aa at /dev/ttyACM5
[2015-11-25 22:40:35] Found GSD 6aa at /dev/ttyACM4
Run exactly the same setup to keep some plants frost free in a greenhouse - ultimate recycling....
Runs fine mostly with cpuminer. though sometimes have to restart the miner from the menu after first boot to get it to settle down.
It will also do odd things sometimes on certain pools, nicehash being most notable. Seems solid on litecoinpool and ghash.
My manual options are set to :-
--gc3355-detect --freq=800 --gc3355-chips=40
This is with a minera image. Had to recompile from source to get minerd running with a manual install on top of ubumtu mate. (it was on an orange pi which may have been the issue)
HTH
IF this is, one of these, GRIDSEED 23~25MH/S SCRYPT ASIC MINER @ 500W, you really don't need to use
Quote
--gc3355-chips=40
the below line should work with BFG in minera or stand a lone BFG . Quote
--scrypt -S gridseed:all --set gridseed:clock=800
Ive acclty had slow downs using
Quote
--gc3355-chips=40
or other settings, 
.I know those are CFG setting or a fork of it.Dmaxl Zeus Fork
--scrypt --usb 1:3,1:4,1:5,1:7,1:8,1:9 --gridseed-options freq=800,chips=40
for find out ports
lsusb
Bus 001 Device 012: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 009: ID 0483:5740 STMicroelectronics STM32F407
Bus 001 Device 008: ID 0483:5740 STMicroelectronics STM32F407
Bus 001 Device 007: ID 0483:5740 STMicroelectronics STM32F407
Bus 001 Device 011: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 005: ID 0483:5740 STMicroelectronics STM32F407
Bus 001 Device 004: ID 0483:5740 STMicroelectronics STM32F407
Bus 001 Device 003: ID 0483:5740 STMicroelectronics STM32F407