Quote from: Deezil on January 06, 2016, 02:36:17 AM

Quote from: Biodom on January 06, 2016, 01:02:56 AM

Quote from: sidehack on January 06, 2016, 12:57:04 AM

Bitmain's BM1384 chart notes 325MHz at 750mV, so running 350MHz is pretty decent. And 350MHz should average you 19.25GH. Which by my estimates would be about WU 268. So it sounds like you're pretty much right on target. Most people can't get sticks too far past 400MHz at 800mV. Recall the S5 "defaults" to 800mV (from a 12V source, assuming balanced nodes) and its stock clock is 350MHz.

Whether you set voltage and increase clock or set clock and decrease voltage really depends on what you want to accomplish. If you want the most hashrate for a given power output, or just the absolute most hashrate, will have different strategies.

I want to beat the Gekkoscience stick hashrate (Gh/s on 24hr average) world record, everything else is secondary...
Max does not count Grin

...cheers

Do I smell a challenge??

I can break out my setup, add my RPi and just run two sticks on a hub, I bet I can get 437 (or maybe 450MHz muahahaha). What's the current record?

Don't think it's the record, but I did 435MHz in the compac solo pool club's 24 hour stock stick over-clock contest that won (I actually let it run for 60 hours before I shut it down).

As for a challenge, I see where there may be a another contest coming up...