Quote from: MakeBelieve on January 10, 2016, 10:47:46 PM

Quote from: rockyforever on January 10, 2016, 08:46:26 PM

Quote from: kilo17 on January 10, 2016, 08:09:43 PM

Quote from: rockyforever on January 10, 2016, 05:50:11 PM

Quote from: VirosaGITS on January 05, 2016, 05:16:17 PM

Quote from: |Ocean| on January 05, 2016, 04:27:09 PM

I prefer Antminer s7 on Avalon 6.
The new Antminer S7 Plus is much more efficient.

There's not a S7+ version, am i misunderstanding?

And now the latest batches of S7's have the same efficiency as the Avalon6, so not the only reason to stick with S7 is the GH/$, since the Avalon6 has a much better build quality.

The avalon 6 comes at 3.5th/s (thats hoping you have a warm room since they run lower in the cold) and the S7 is 4.8th/s. You can get the S7 plus shipping below $1100 currently. You can ONLY get the Avalon for $1112 in the current group buy and living in the US.

The better deal is the S7. People assumed the Avalon 6 would be able to flex by changing the volts but has not been the case at all.

You can order an S7 Batch 9 with shipping and import fees that will likely cost about $1150 and it isn't shipping for several weeks. A better comparison would be the Batch 8 which will run you close to $1300 shipped with import fees and ships now.

As for overclocking the Avalon. I get 3.8-4 Th at 12.2-12.4 volts all day long.

Not to mention the USA warranty - I had 1 Avalon6 replaced and it was as simple as calling them and sending it to California. Try that with Bitmain. I would also bet that the Batch 8 and 9 S7 have a much higher failure rate than the Avalon6.

Not to mention I get the Avalon6 in 2-3 days while people wait on an S7 for weeks. I make up the difference by the time yours arrives.

USA there is no import fees which reduces the cost. Also long term, 1 th/s more per miner will out perform avalon 6 even getting them 2 weeks earlier.

I beg to differ: check the link below and see the $800 charge for import fees/duties etc. I can supply a bunch more of those links if necessary.
https://bitcointalk.org/index.php?topic=1165628.msg13432585#msg13432585

Also, if you are counting on the Batch 9 getting here in 2 weeks, good luck. If not then you are paying for what the s7 would mine for the Batch 8

You can call UPS and make arrangements for them to call you from now on ANYTIME you have a shipment coming in from outside the U.S. Also, I have edited my address on BITMAIN's website in my account to include the following: HST CODE 8471.41.0150 That is actually part of my address now to avoid this occurring again in the future.

I recommend everyone do the same thing in their BITMAIN account: