Quote from: GriffinHeart on January 30, 2016, 11:28:24 AM

You've configured something wrong I think. Small block erupters don't usually fail unless settings tell them to do something that is not in their ability to do. The U1-U3 range though has so many stability problems it's quite impressive actually. I've figured out exactly how many times I must plug and unplug my U3 for it to work. (About 9)
The settings are

Code:

cgminer.exe --au3-freq 237.50 --au3-volt 820

These are MY settings. The 237.50 and 820 are variables.
The volt setting doesn't usually work unless you have a modified miner, changing voltage has to be done manually.
(Note: My miner gets quite hot, meaning don't leave yours on wood or anything without proper sufficient cooling!)
You can change frequency to what you want, just don't set it above 250 or expect fireworks.

welp, i just tried your code and it just keeps saying [2016-01-30 08:01:28] Pool 0 difficulty changed to 256.

what am i doing wrong? i do into devices and printers and it shows that they are the cp2102 uart to bridge controller, but their isnt a com port number