Quote from: Legacy2005 on March 02, 2016, 02:15:11 PM

Quote from: leowonderful on March 02, 2016, 12:43:22 PM

Quote from: Legacy2005 on March 02, 2016, 12:34:16 PM

pic of the setup in the basement:

https://gyazo.com/6c3dce77c8f63f8d12e62567c468aa0b

S5s, amirite? That's a pretty good setup. I run my mixed s3/s5 rig outside my house in a shed. Temps stay way down as long as the ambient isnt too hot

How hot it get down there? Looks like you have a pretty good way of cooling. Noise as well?
I feel like I get way too excited on mining rigs. Theyre just SO interesting

its in a basement so the noise is not to bad unless it gets warm then the fans get whiney. but they are set to 100% anyway on all the machines.

3 s5
4 s7

the s7s are the one with the tubes attached.

all overclocked. the s5s are running at 412.5. 3 s7s are running at 731, with 1 running at 656 (batch 7). trying to eek out as much btc before the 1/2.

its about 80ish down there which is more then i want, the miners are running mid/high 60s. would like to get them down to low 60s.
Thinking of upgrading my "exhaust" fan to a larger one. looking at a 24inch barrel to move some of the hot air out of that area.

also trying to upgrade tubing attached to the exhaust fan as that is just the tubing i pulled from the bathroom exhaust fan to help move some heat outside. will probably end up with a 4 inch tube vs the 3inch thats on there now.

what fan settings did you use for the overclocked S7s?