Quote from: pokeytex on March 20, 2016, 01:19:08 AM

Quote from: sprocket_fpga on March 20, 2016, 01:12:22 AM

I created a bitstream for the ZTEX 1.15y board and want to share it with the decred community. If you have a ZTEX 1.15y board, you should be able to mine DCR using this modified cgminer and bitstream.

I have put the bitstream at the following link. It gets about 800Mh/s.

   https://www.dropbox.com/s/j1d12ixhfthj0y7/ztex_ufm1_15y1.bit?dl=0

The cgminer is located at the following link:

   https://github.com/sprocket-fpga/cgminer_3.7.2_ztex

Below are the steps I used to modify Decred cgminer 0.0.5 to run on my Raspberry Pi.

   1) sudo apt-get update
   2) sudo apt-get install libusb-1.0-0-dev libusb-1.0-0 libcurl4-openssl-dev libncurses5-dev libudev-dev screen libtool automake pkg-config libjansson-dev
   3) git clone https://github.com/decred/cgminer
   4) cd cgminer
   5) sudo ./autogen.sh
   6) sudo ./configure --disable-adl --enable-icarus
   7) copy .c and .h files to cgminer directory
   8 ) copy .bit to cgminer\bitstreams
   9) sudo make
   10) Command Line: cgminer --disable-gpu --blake256 -o < url:port > -u < username > -p < password > --ztex-clock 100:100

Note: This miner only works on Getwork pools. It does not have the Stratum logic incorporated yet.

Open Issue: This miner seems to work fine for up to 4 ztex boards. More than 4 boards is causing the cgminer to crash after 10 minutes. If you have any ideas how to fix this issue, please PM me.

-----------------------------------------------------------------------------------------------

If you find this miner useful, please feel free to leave a tip:

  BTC: 14QcqFWZ9Y1j1aUHeUNySoMr4t9ZWJYt2a
  DCR: Dsj6WcnPYDPxDr99pQkTKeFsfh55KBJS2jY

Hehe - any chance you can find a way to port to Cairnsmore 1 units? I am loaded with them! :-)

Not trying to be funny but you should sell some. Look at that price for a new one.

https://www.enterpoint.co.uk/shop/home/108-cairnsmore1-.html Shocked