Tried it again thoroughly step-by-step, like you´d suggested - same result as above.
I´d uploaded my original MSI Nano BIOS here, if you are interested.
Maybe you can find any differences.
I´d uploaded my original MSI Nano BIOS here, if you are interested.
Maybe you can find any differences.
Ok, will check it out tomorrow and will mod core voltage to -100mV and mem voltage to -100mV as well.
Greetings.
-75Core Voltage, -100 mem voltage
Try this one, this should work perfectly!
Eliovp, can I edit your modded Bios with Fiji Bios editor and change the target temperature to something below 75C?
Is there any other thing I should be aware of before flashing edited Bios through Fiji Bios editor?
Thanks.
Is there any other thing I should be aware of before flashing edited Bios through Fiji Bios editor?
Thanks.
You sure can.
Make sure any OC software is shut down or removed. Completely shut down computer after flash. Best to reinstall drivers.
Good luck!
Question, what drivers and miner you using on the modded Bios?
I use the 15.11 and 15.12. There is no difference at all. I remember the OP use 16.4.1 or something like that.
Yup, even did a test on the newest one 16.5.*, works great.
Is that faster than the previous versions, such as the 16.4.1 or the 15.12 as required by the Claymore miner?