Quote from: Bitcaracas on May 23, 2016, 07:09:24 PM

Quote from: dannygroove on April 25, 2016, 03:39:51 PM

Quote from: BitmainWarranty on April 23, 2016, 10:45:38 PM

Can you at least make it to the login page or the initial password screen, then to this main page with blank data?

If so, you have a few options

1st be to factory reset the S7 with a paperclip. There is a pin hole next to the Ethernet connector and use a paperclip and press and hold the button for about 10 seconds and let it go and wait for about 30 seconds and then physically reboot the S7. This may restore it to the factory default setting.

If this does not help, you may want to go find 8gb microSD card, and create a bootable MicroSD card and insert it into the microSD slot of the S7 and power it off and power it back on. Let the S7 complete the boot process and if possible, let it run as is for about 5 minutes then your Beagle Bone Black may be restored to the factory default setting.

Image and Imaging Tool:
https://bitmaintech.com/support.htm?pid=007201604120945219855QObfk20066C

If none of these works, your Beagle Bone Black or the Control PCB may be damaged.

Quote from: dannygroove on April 23, 2016, 03:24:27 PM

Antminer S7 B10 not connecting to the setup page. Nothing is configurable, miner is inaccesible.

http://imgur.com/yDMsOzb

Someone told me they fixed this in a new firmware update. Is this true? Im afraid to do a firmware update and that my miner will brick.

Ive tried resetting multiple times with no success, I can get to the login page but after 2-3 minutes I only get the blank page. I will try the bootable microSD option tomorrow and will report back. Thank you

Hello; i am having the same problem with my s7. i log into de miner interface but is blank. anyone knows the the answer to this matter? i really apreciate your feedback on this.

I RMA'd some boards, I still have a couple of problems with some miners, which leads me to think that PCB is damaged on some of them. This is truly the last time I'm supporting BITMAIN with my money to produce such junk. I hope there is some other company out there that takes over in the near future.