Quote from: Marvell1 on June 22, 2016, 04:34:37 PM

Quote from: flugster on June 22, 2016, 12:43:15 PM

First of all i want to thank Eliovp for the sharing of knowledge and all the thread participants for the added infos.

I'm on the -175mV rom since 4 days now and all is fine but headless boot won't work.
I need to plug hdmi to monitor and it boots fine
at the moment i have two nanos on usb risers and one on motherboard, one 700W PSU
mobo is H81 Pro BTC and i'm booting lubuntu with claymore's on thumb usb

@Eliovp: i think i have read u have the same mobo and same cpu celeron g1840 did u have issues on headless booting?

also i'm on 312w reading on killawatt for mobo+3nanos with your stock -175mV rom audio and sata's disabled is that good? i thowght i'd go lower with 75watt for each nano i was expecting.

i'm going to try -200mV stock soon.

Thank you again

good mining to all.

are you dual mining? dual mining uses way more power btw you wont get much more reduction from the 200 bios o ran both of them the power use is the same. eth only mining you will get 80watts claymore with say 50 dcri you go up to 125 watts and max of 100 dcri i was seeing 150 watts

Not tried dual mining yet with my nanos
will try that soon to