Re: [35+PH] Kano CKPool kano.is 0.9% PPLNS US,DE,SG,DK,JP,FR
My new S9B3 is now pointed at KANO. 
Unfortunately it popped a breaker in my miner room causing me to have to unplug an S7.
I guess I'll have to put the S9 on a Bitmain 240 instead of the two HP PSU's and move one of the S7's to another room.
My speed on the S9 appears a little below spec and the HW errors on one board are much higher than the other two. Board three is currently much higher in HW errors.
EDIT: I had to pull the plug on the S9 as the temps on board 3 shot through the roof.
Time to move some hardware around.
Unfortunately it popped a breaker in my miner room causing me to have to unplug an S7.
I guess I'll have to put the S9 on a Bitmain 240 instead of the two HP PSU's and move one of the S7's to another room.
My speed on the S9 appears a little below spec and the HW errors on one board are much higher than the other two. Board three is currently much higher in HW errors.
EDIT: I had to pull the plug on the S9 as the temps on board 3 shot through the roof.
Time to move some hardware around.
Uh...kinda hard to run 27 amps of miner on a 20 amp circuit (assuming). I've got a friend here running an S9 on two HP bricks with no problem, but most households (on 120v) are 20A, as are his, so he can't do much else on that breaker. I prefer them. Less expensive, hardy. There have been some pretty informative posts on that board issue. May need to underclock a bit.