Quote from: jds1119 on July 23, 2016, 06:16:13 AM

This is what I sent to Bitmain just know but hoping someone can help me before them.

I just recieved my S9 about 36 hours ago. I connect and hook it up like all my other miners before. I have had about 25 different Antminers. It took a bit to coneect to the network, I had to use different wires but it eventually connect, it ran for about 6 hours and stopped hashing, but stayed powered on. Now I cant get it back on my network with my other machines. I have reset my router and switches. I have tried to reset the miner by the button on the front and nothing works. The mach powers up and seemed to be working fine but it wont connect to the network nor will cgminer start. I have attached a YouTube video, I removed the front plate but have not disassembled the miner at all. I need to know what needs to be done. Do I need a new controller?

https://www.youtube.com/watch?v=mPBOCCsmc2k

I will tip anyone that can help me.

Thanks

One of my S9's had the same issue. It was the BB board (black board on top of the controller with the network connector) that had to be replaced. Bitmain warranty asked me to swap it out with one from a working miner to trouble shoot (verify) the problem. Once I verified the problem I filled out a warrenty repair ticket and sent it back to Bitmain and they sent me a new one. Took about two weeks total to get it up and running again.
You will have to pay shipping one way and they will pay return shipping. FedEx was cheaper than UPS to China ($80.00).

Let me know if you need anymore info. Good luck!