Quote from: BitmainWarranty on October 12, 2016, 08:04:14 PM

If your control PCB has 4 data port, please try using 1 unused port to connect to hash PCB that does not have red LED flashing near the PCI-E power plug when the miner is hashing.

Other wise, if you can take a look at the hash PCB when the S9 is mining, you may notice one of the hash PCB does not have the little red LED on or flashing. (That is the PCB in trouble here)

Quote from: boody123 on October 12, 2016, 05:36:44 PM

Hi,

in one of my Antminer s9 Appears only 2 hash board chips on Miner Status not 3 , this happens after 4 day of working .. despite of I have connected all power cables right in their places I have checked with different power supplies , I have also change data cables but it doesn't Appear.

@ BitmainWarranty: Is it possible to get a service report for the diagnosis/repair or exchange performed on the boards we send you for repair? I asked Ashi (?) about it but he is in the messaging end of your work, not the service tech that did the work.

As a tech person myself (industrial laser design/research/repair) I would really like to know what failed on the 2 s9 boards I had you repair/replace. Both boards are working perfectly now btw. Great work and a very reasonable price/turnaround time. Cheesy

.