Quote from: frozn0000 on November 02, 2016, 12:02:36 AM

Quote from: Tmdz on October 31, 2016, 08:06:00 PM

Quote from: Walrusbonzo on October 31, 2016, 07:51:54 PM

Quote from: markus124 on October 31, 2016, 07:35:20 PM

Im using my 7950 shappire rig of 6 gpus getting a media of 16 hashes per gpu. is this good for this type of gpu??
Is there any ways of use 99% of my gpu usage, im stuck at around 85%?

Thanks for the help if u could. Grin

If the GPU is sat between 80~85% as your graph shows it suggests that they're memory bandwidth/latency limited. Most 7950/7970 will happily do atleast 1500MHz, start there. Failing that you probably want to use a custom BIOS with tighter timings, usually copying a memory strap from 1250/1375 to 1500 does the trick. When I used to have 7950s I was using tighter timings(The Stilt's) and memory clock was around 1700MHz. This provided excellent performance for scrypt and Eth type crypto.

Kind of slow mine does 20-25 sol/s with genoils miner 0.4.2 on stock settings

Thanks for this. I have a folder setup with this for each of my gpus. 280x x 5. After driver crashes for that paticular gpu genoil won't mine. Not your fault in know but is there a way to auto fix the driver issue so genoil will mine? After driver crashes it only mines 0sols

I'm tyring that putting each Gpu in it own folder and useing the -g cammnd to start each one by it self i have one going dead for no reason in my three card rig it either the pool or the miner sense it's not all ways the same GPU that's drops to zero ,