Quote from: philipma1957 on December 18, 2016, 08:57:51 PM

Quote from: tholmes4005 on December 18, 2016, 07:43:32 PM

I did have configuration set, but I did not have access to view the same web gui as Philip had.

So I just typed in: /cgi-bin/luci/;stok=7cf7b0e7c4c587fa903333d06d533a8c/admin/status/cgminerstatus
and was able to get to the status page and it had a link to restart cgminer.

Once I restarted CGMINER the controller started communicating with the miners, but no mining still, just the fan running.

I am going to flash an image to the PI tonight and try that.

Weird.

edit: LOL, I was able to also reboot the miners and then they started mining...So whatever...I am still going to flash the image on the PI...shouldn't have to do this everytime. Thanks for the help everyone!

no buy a new card do not flash the oem card.

trust me been there done that.

sometimes the oem card won't flash correctly.

just buy a decent 8gb card from amazon

class 10
https://www.amazon.com/SanDisk-MicroSDHC-Standard-Packaging-SDSDQUAN-008G-G4A/dp/B00M55C0VU/ref=sr_1_1?

get 2 load them both and you will have instant back up

see below on your photos click the advanced version tab on left side

http://scoutprop.com/images/AVALON-PICTURES/AVALON-DASHBOARD.png
http://scoutprop.com/images/AVALON-PICTURES/AVALON-NETWORK-CONFIG.png

FYI...Bought 2 micro SD cards as suggested. Flashed the image and the controller is working great! Thanks for the help!