Quote from: felixbrucker on December 30, 2016, 09:10:01 AM

Quote from: TracerX on December 30, 2016, 02:36:46 AM

Quote from: TracerX on December 30, 2016, 02:32:24 AM

Quote from: Xardas2014 on December 30, 2016, 12:33:05 AM

Quote from: TunerDude007 on December 30, 2016, 12:19:47 AM

Quote from: Xardas2014 on December 30, 2016, 12:06:34 AM

Quote from: TracerX on December 29, 2016, 11:49:16 PM

Quote from: Xardas2014 on December 29, 2016, 08:21:24 PM

@miningpoolhub

Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.

I've been running a number of baikals here, no problems that I've noticed. I'll keep a closer eye on it for a bit and let you know if I see anything.

This is what mine is doing. In fact it was down when I just checked it and got it going again.

https://s29.postimg.org/lbgmaqznb/Baikal.jpg

No problems here... But I am only mining dash atm..

Could you set one of your Baikal's to mine the ASIC Baikal to see if you have problems? I've been watching mine(since I'm bored) and the problem seems to happen SOMETIMES on a coin change. It doesn't do it every time, but when mine goes down it is during a coin change.

I only use auto-switch. Let me go look at it, I've not checked since I posted.

It looks like it correctly auto-switched about 45 minutes ago. I might power your unit down, unplug the adapter so the caps drain (like, for a minute or two) then fire it back up. If you're comfortable SSHing into the device (the login is the same as the web interface) you could do a "sudo shutdown" before you pull the plug to let it shutdown gracefully.

Let me know if that helps.

i had the same problem some time back
for me my baikal miners were running the first multi-algo image (v2.1 orange pi image) and an upgrade to the v2.2 image fixed it (v2.2 is the image with nicehash, mph and zpool multi-algo switching officially supported)

might be worth a try if you are running v2.1

This is likely what you should do. I didn't even consider the firmware--I always replace the stock miniSD card with a cheap Sandisk and drop the latest image on it. I've had two of the provided card go south on me, so I don't even hassle with it anymore.