Quote from: sav112 on March 22, 2017, 12:02:51 PM

Quote from: sav112 on March 22, 2017, 12:01:27 PM

would anyone be interested in testing / using a crown pool in the cwi-poolsystem if it was setup? ...

http://pool.chainworksindustries.com/ ...

Your pool does not work

tanx sav112 ...

as posted above - the issue if the starting diff ...

as many asics will just terminate connections ( built into the firmware of the miners ) when the mining diff is too low ...

the diff is currently set at 0.1 - and that is ok for cpu / gpu mining situations ... though the stratum is also set to sample ( and change if necessary ) every 70 seconds ... that time frame is more than most of the miners are willing to accept - so the alternative to lowering the sample rate is to setup a high diff port which will start at 1024diff and will cap at 7000diff for testing purposes ...

if this is successful - then we can up the second port diff to a much higher diff level ...

ill be back with an update very shortly ...

tanx very much for your help ...

#crysx