You should try to ping the pool first, if the latency is around 100-180ms is ok . I suggest http://zcash.flypool.org
30 ms latency, I'll try it tonight thank you !After a bit of tweaking, I've settled on the following for my EVGA 1060 6GB SSC card in my main work/gaming PC:
Power target: 61%
Temp target: 90C
GPU offset: +90
Mem offset: +900
Fan target: 45%
Clocks are at ~1900 core and 9600 memory and this nets me ~310 sol/s @ 90W which ends up being around 3.4 Sol/W
The temperature is right around 67C and the fan noise is very quiet
The best thing is I can just work away, watch videos etc. and I barely even notice that it's mining
Alright thank you for sharing, I'll apply these settings when i start mining and tell you the results.Power target: 61%
Temp target: 90C
GPU offset: +90
Mem offset: +900
Fan target: 45%
Clocks are at ~1900 core and 9600 memory and this nets me ~310 sol/s @ 90W which ends up being around 3.4 Sol/W
The temperature is right around 67C and the fan noise is very quiet
The best thing is I can just work away, watch videos etc. and I barely even notice that it's mining