Quote from: frostminer on May 12, 2017, 01:37:48 PM

Quote from: frostminer on May 12, 2017, 12:08:38 PM

Quote from: Jamievs on May 12, 2017, 12:04:24 PM

Quote from: frostminer on May 12, 2017, 11:57:10 AM

Quote from: frostminer on May 12, 2017, 09:12:28 AM

Quote from: djazher on May 12, 2017, 12:07:14 AM

Quote from: notbatman on May 11, 2017, 11:56:13 AM

Quote from: frostminer on May 11, 2017, 11:46:59 AM

Quote from: djazher on May 11, 2017, 10:55:01 AM

Quote from: yslyung on May 11, 2017, 04:24:14 AM

kid talking ... imo most likely he owns nvidias . . .

Quote from: woodaxe on May 11, 2017, 03:23:00 AM

Edit:
Im hoping to pick up a few RX 570ITX today to test.
If they are somewhere near the R9 380ITX ... im going to be so happy. Best cards I ever had for mining.
So small.... 1 fan.. 1 power connector... outperforms r9 380X.

Hoping this will be the same family.

http://www.sapphiretech.com/productdetial.asp?pid=3548F713-062B-4A98-B584-D0D211C5308E&lang=eng

W O W !!!

After 20 mins of testing.. i can hands down say THIS IS THE NEW BEST CARD FOR MINING!
With default latest driver and just a little OC ... this tiny card is doing 26 MH/s

ON A SINGLE 6 PIN POWER CONNECTOR!

and its cheap as f***... and its tiny!
And its only got 1 fan!
For comparison my R9 390s use 2x 8 pin power connectors.. has 3 fans... makes lotsa heat and cost twice this sweet little monster.

How is the power consumption and have you tried dual mining?

Shutting it down now to mount more and only have ellesmerge gpus in the same rig.
Had one mounted with one r9 380 itx for comparison, and ran things on a sgminer with little or no tinkering.
Will test claymores after boot and more cards.

Did some more testing.

http://imgur.com/a/AUqLd

Sapphire RX 570ITX, 2048 streams
Ellesmere, 4096 MB available, 32 compute units
Msi afterburner 4.3.0
Crimson 17.4.4, Win7/64

ETH ONLY (ethi 24)
22.5Mh/s   Default mode 1 ETH only
116 Watt

ETH ONLY OC (ethi 24)
26.4Mh/s   GPU/Mem 1307/2027 mhz
150 Watt

ETH+SIA (dcri 24, default)
21,8Mh/s   ETH
525 Mh/s   SIA (925mh/s at 400dcri)
119 Watt

ETH+DCR (dcri 38)
21.9Mh/s   ETH
830Mh/s   DCR (1450mh/s at 400dcri)
121 Watt

ETH+Pascal ()
Cancelled.. didnt bother to find another pascal pool.

Now.
Whats really interesting is setting the power limit in Afterburner to -18
Resulting in 75W and 19MH/s ...

I think this card has some GREAT potential for modded bios and low power usage.

I have to underline that i have NOT done any testing with drivers or any modifications.
F.ex the power usage at OC- 140Watt.. is probably way overdone and could be much lowered.

This was just a fast test to get an impression of the cards performance.

I can say fom experience of having a lot of R9 380 ITX(which are exactly like this one), its a golden nugget of a miner.
But this new one and its low power usage makes me remodel my next miners... dont need that powerful PSUs.

Again:
ONE 6 PIN power connector. ONE!
ONE FAN.
TINY CARD!

thanks for the info i normally run my eth drc at dcr 26 whats that look like with those cards if youve got time many thanks