Quote from: Kompik on June 02, 2017, 07:34:55 AM

Quote from: jadefalke on June 01, 2017, 06:37:26 PM

Quote from: Kompik on June 01, 2017, 06:24:10 PM

Quote from: tflux99 on June 01, 2017, 06:13:45 PM

Quote from: Kompik on June 01, 2017, 05:36:41 PM

Quote from: QuintLeo on May 25, 2017, 09:08:28 PM

Quote from: MA3A on May 25, 2017, 04:50:35 AM

i find 1070 being very touchy about temps...dont see anything like this with 1080ti

That's why you bump up the fan profile - ALL recent video cards prioritise "quiet" over "cool", with the early EVGA 1070 models being a POINTED example in going way too far that direction to the point they were having some of them fail due to overheating BECAUSE the fan profile had the fans running so slow they couldn't respond to load spikes fast enough.

1080ti tend to have better fan profiles to start with because the makers *KNOW* they are going to generate a lot more heat so they bumped the fan speeds up a lot higher to start with than on a 1070 - and if you pay attention you will note that most makers have the SAME cooling solution available on their 1070 models as on their 1080 and 1080ti solutions, except for some of the LOW END 1070 models with cooling solutions that can't handle a 1080Ti at all.

IMO any miner that doesn't have the fans on his GPUs running at 90% or more by the time the card gets to 80C (and preferably 70-75) is DEMANDING to have their card overheat and die.

As far as "most 1070 can do over 31Mh/s" - I call BULLSHIT on that one, NONE of mine have ever managed more than 30 no matter HOW HARD I pushed clocks, even at 180 watts much less 95.
ETH depends WAY too much on low memory latency, and that VARIES WIDELY depending on the brand and sometimes the specific chips of the memory in a card.

Mining ETH on a 1070 isn't a lost cause.
It IS still very profitable, much more so since the recent ETH price runup, just LESS so than other options.

NVidia-SMI is nice, but I've seen it get confused and "off" often enough that I don't trust it to be entirely correct.

Ok so I dont mine ETH, but i switched and setup my cards just for you. Here is the screenshot of my 7x1070 rig. And please do not talk bullshit to people just because of your extremely low knowledge of the nvidia cards ( judging from your previous posts where you are lost tbh). Just for your knowledge rising TDP will not give you any more MH/s in eth.
http://imgur.com/a/oX9Wl

Oh and one more thing, calculating profitability of nvidia cards based on zcash or eth is wrong. Every day you mine zcash or eth or any other default coin on what to mine you are loosing your ROI to AMD cards.

lol your screenshot is funny 1 minute of mining if i try that i can get 34 mhs out of the 1070 but after 20 seconds it crashes i bet your system will freeze after some time wahts your clock speeds and undervolting settingsyou do that at 950mv @ 2100 mhz ~ 4400 mhz ram more than 29 is not stable 4 me sry 4 my bad english hehe

These settings are stable and can run days. I wont mine eth for one day just to show you a screenshot sorry. As I have said earlier you do not want to mine eth with nvidia

Also please show me a screenshot of 1070 doing 34, even for a second! Thanks!

Quite nice Results, what Kind of Cards are that?

This rig is: EVGA GeForce GTX 1070 SC GAMING ACX 3.0 Black Edition 8GB DDR5, 08G-P4-5173-KR, its the cheapest EVGA cards out there

at least in my country.

Hi Kompik. What are your exact settings to get that performance in your picture with your card? Thanks, I really appreciate it.