Quote from: jotay on June 07, 2017, 09:52:37 PM

Quote from: ltcsprite on June 07, 2017, 09:14:26 PM

Quote from: magnoman on June 07, 2017, 04:28:59 AM

Quote from: ltcsprite on June 07, 2017, 12:14:15 AM

Blaaaaaaaah this motherboard

Now I can't even get past the Bios screen, doesn't even let me enter win10 with 0 GPU's installed.

?? Anyone

Mine was finicky until I manually set the RAM speed to 2133. Also if you use a single stick make sure it's in the 2nd slot from the CPU.

I can't even get the board to run with more than 4 GPU. If I add a 5th GPU then 3 of the 5 GPU's give error code 12 in device manager.

I have spent literally 3 days trying to get this working and I am sick of this motherboard already. I feel like I have tried everything.

Tried several bios versions, 4g encoding, PCI Auto, Gen1, Gen2, Gen 3, diff risers, swapped ram, swapped cards, changed order of USB risers, tried everything listed in this thread and nothing works.

And I have 2 of them. Undecided

About to just write it off as a loss at this point. All because I wanted to run 7 GPUs. Bleh.

this work for me:

you can use simplemining.net -> bios 1.D version, 4G Decoding set to Enabled, PEG 0 and PEG 1 set to auto, Windows 8.1 / 10 = "Disabled"; Windows 7 = "Disabled"... Important: enable the integrate video and connect the monitor to him. ---- 7 x Rx470: Dual mining ETH-PAsc = 148.74 MH/s 2379.91 MH/s

hope this work for you. Grin

You're my hero.

That bold part did it. I enabled onboard video and connected monitor to onboard video, disabled 4g encoding, removed all GPU's

Ran DDU, re-installed drivers, rebooted into Bios, enabled 4g encoding and shutdown. Re-installed GPU's and fired it up.

We see all 6 cards now.

Thank you! I have to wait til I get some other cables to add the 7th.