Quote from: Sequoia93 on June 09, 2017, 04:54:56 PM

-make sure your bios version is either from 12/2016 or 5/2017. This can be found in the top right corner of the BIOS screen

-go to advanced settings and enable "4G Decoding"

-go to integrated graphics settings and change the first option from "PEG" to "IGD"

-plug your monitor into the integrated graphics port on the mobo

-Use either simpleminer-RX-v1093-4.11.rc8-16.60-enableexe0ANDips0.imgc or simpleminer-RX-v1093-4.11.rc8-16.60-enablerc60.imgc

they can be found here: https://simplemining.net/download/

-and make sure you are using a Skylake processor (not kaby lake)

Any other settings you changed will cause issues. Set to Auto/pull cmos to get back to defaults before changing what I said above.

Had the same problem the other day. I flashed to the 1D driver and this part in bold is what really fixed everything.