Quote from: fullzero on June 11, 2017, 06:32:25 PM

Quote from: cvitanihc0011 on June 11, 2017, 06:25:34 PM

I managed to put this only on one USB stick without problems.
Other 2 I get an write error at around 90% or so and now I can only see in windows the 8mb partition .
One is a usb 3.0 stick and one random.
The one that works is 3.0 also but they are all different brands

Any way to format these sticks again ? In win i can see the other part of the stick in disk manager but i have it as unalocated space if I format it .

Thanks!

You can always re image a usb with hddrawcopy; regardless of what partitions / formatting it has to begin with.

If when you use hddrawccopy it indicates your USB is 15.5gb or larger; you will have an error at the end of imaging: but the USB should still work.

If hddrawcopy says your USB key is less than 15.5gb; it isn't going to work.

Ah oki
Its working.
The stick that worked without error was a 32gb one . The rest are 16gb
Running 7gpu on a msi z170a gaming m5 without issues . I'll try 8gpu .
Teamviewer connection works fine also .
Thanks for your support again