Quote from: fullzero on June 11, 2017, 11:41:05 PM

Quote from: chaimroid on June 11, 2017, 11:37:50 PM

Quote from: fullzero on June 11, 2017, 11:30:59 PM

Quote from: chaimroid on June 11, 2017, 11:27:45 PM

Quote from: chaimroid on June 11, 2017, 11:15:07 PM

Quote from: fullzero on June 11, 2017, 10:59:43 PM

Quote from: chaimroid on June 11, 2017, 10:53:35 PM

Quote from: fullzero on June 11, 2017, 10:40:49 PM

Quote from: chaimroid on June 11, 2017, 10:34:27 PM

Quote from: Maxximus007 on June 11, 2017, 09:21:20 AM

Quote from: chaimroid on June 11, 2017, 08:41:29 AM

Hi! First of all, that's so much for making this. It's been super easy to use and (as far as I know) is reporting the highest hashrate for me so far!

I have an ASUS Prime Z270-A with 4 EVGA 1070 SC2 cards. I've had trouble trying to OC them (have seen maybe you can't because they're factory OC'd?) and oneBash spits out errors trying to assign GPUTargetFanSpeed when it starts up. Maybe you know how to get around this?

Thanks so much!

Do you use a fast USB stick, as recommended? Setting power limit can cause some problems on slow ones. What is the trouble you're getting with OC? What are the values used?

I've only tried this with the stock values (with payment addresses changed). Also I'm using this stick: https://www.amazon.com/gp/product/B013CCTM2E. I believe it's plenty fast.

That USB key should be good.

Default nvOC is to OC the cc + 100 and the mc + 100 so if you scroll to the top of the gnome terminal (mining process) you should see messages like this:

https://ip.bitcointalk.org/?u=https%3A%2F%2Fs13.postimg.org%2Fq08huqnyv%2FIMG_0270.jpg&t=577&c=yq0szP4ICxv47w

Do you?

Unfortunately no. =-( Right now this is all I see.

https://s21.postimg.org/pyg2d9usn/IMG_7178.jpg

press f12 to open the guake terminal, if cpuminer is running press ctrl + c to close it or open a new tab and enter:

Code:

cd /etc/X11

then:

Code:

ls

you should see a file that looks something like: '/etc/X11/xorg.conf.06082017' but most likely with a different date number at the end maybe 06092017? (it will be from the first day you launched nvOC so it should start with a 06 )

anyway note what the date is on that file and change the following code to match it:

Code:

sudo cp '/etc/X11/xorg.conf.06082017' '/etc/X11/xorg.conf'

and enter the password: miner1 when prompted.

then logout

and log back in

and tell me if you see the OC messages.

I see the same thing as before. =-(

If it helps, running literally any `nvidia-settings` command just does this:

Code:

m1@m1-desktop:~$ nvidia-settings -a [gpu:0]/GPUGraphicsClockOffset[3]=100
Failed to connect to Mir: Failed to connect to server socket: No such file or directory
Unable to init server: Could not connect: Connection refused

ERROR: The control display is undefined; please run `nvidia-settings --help` for usage information.

if you enter:

Code:

lspci | grep VGA

what does it show?

Code:

m1@m1-desktop:~$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)

Have you connected the monitor to the motherboard?

If so:

powerdown; connect the monitor the the GPU connected to the first 16x pcie slot

and power on

Comes back with the same errors.