Quote from: xleejohnx on June 15, 2017, 04:11:38 PM

Quote from: TheCoinMine on June 15, 2017, 04:04:39 PM

Quote from: Maxximus007 on June 15, 2017, 02:07:00 PM

Quote from: TheCoinMine on June 15, 2017, 01:46:07 PM

Quote from: xleejohnx on June 15, 2017, 01:30:50 PM

Quote from: TheCoinMine on June 15, 2017, 12:37:13 PM

Quote from: xleejohnx on June 15, 2017, 12:29:30 PM

Quote from: TheCoinMine on June 15, 2017, 09:56:20 AM

Alright so I'm sort of at a loss for this one. I have everything connected, psu mobo CPU and gpu. I turn it on and everything fires up. Connect it to monitor, and my monitor displays no signal. I have tried different cables, plugging monitor into mobo instead of card, using a different monitor, and nothing. However, when the motherboard is on, everything will run for about 10 seconds, then cut off for 2 seconds, then pick back up again. No idea why it isn't connecting to the monitor. Any help would be greatly appreaciates

Is the motherboard throwing out error codes?
What's your setup too

I can't even tell. When it is connected to the monitor, the monitor is not reading it. like the motherboard isn't sending a signal. I have tried 2 monitors and 3 different cables. Have also tried connecting to gpu, mobo, and mobo with gpu not connected.
Building a trio 2 1080ti and 1 1070 mini with GIGABYTE GA-Z270P-D3 mobo.

Does the motherboard boot without a gpu in it?
Does the CPU have intergraded graphics?
How big the power supply you have?

The motherboard will turn on but still not getting a signal on monitor from it.
CPU is intel Core i3-700
And PSU is 850w

And you're sure your USB stick is burned correctly? USB booting is enabled?

It's burned correctly but idk how i would be able to enable USB booting if I can't do anything with the mobo since its not connecting to my display

It being a newer motherboard it wouldnt need to be set to USB boot
With it not even posting. I would have to say bad CPU or memory

Well that's just great. Just don't get why everything turns on and looks like its working and the display just wont connect.