Quote from: TheCoinMine on June 15, 2017, 10:29:40 PM

Quote from: TheCoinMine on June 15, 2017, 05:35:48 PM

Quote from: fullzero on June 15, 2017, 04:47:34 PM

Quote from: TheCoinMine on June 15, 2017, 04:26:20 PM

Quote from: xleejohnx on June 15, 2017, 04:23:19 PM

Quote from: TheCoinMine on June 15, 2017, 04:18:43 PM

Quote from: TheCoinMine on June 15, 2017, 04:26:20 PM

Quote from: xleejohnx on June 15, 2017, 04:23:19 PM

Quote from: TheCoinMine on June 15, 2017, 04:18:43 PM

The motherboard will turn on but still not getting a signal on monitor from it.
CPU is intel Core i3-700
And PSU is 850w

And you're sure your USB stick is burned correctly? USB booting is enabled?

It's burned correctly but idk how i would be able to enable USB booting if I can't do anything with the mobo since its not connecting to my display

It being a newer motherboard it wouldnt need to be set to USB boot
With it not even posting. I would have to say bad CPU or memory

Well that's just great. Just don't get why everything turns on and looks like its working and the display just wont connect.

Do you have another board or CPU or memory to test?

Not currently. Back to the store i guess

Whenever there are weird problems with displaying; it is usually a problem with the bios not posting correctly due to a conflict in the system.

To best mitigate this:

Ensure the monitor is connected to the primary GPU ( the one in the 16x slot closest to the CPU )

Disconnect the USB or SSD/HHD from the rig.

Fully power off everything: including the PSU.

Press the power button several times to clear any remaining power in the mobo.

Turn the PSU powerswitch back to | "on".

power on (without the USB attached)

See if the bios posts; if you get nothing in 20 seconds; press ctrl + alt + del repeatedly until the system reboots.

Wait and see if the bios posts.

If the bios posts attach the USB key and press ctrl + alt + delete.

Let me know if this works.

Great I will definitely give this a try. Hopefully it works. Really appreciate it

Alright this worked perfectly. I have it booting. getting the image on to the cardnow. set up for zcash. Recommended power limit? Individual power limit? Anything else that needs to be changed aside from wallet etc? Thanks

You might want to change the workername for future distinction of multiple rigs.

With 1080tis for optimal hashrate (without using a ton of power) I would use 225 powerlimit +100cc +900mc

For optimal power efficiency I am not sure; Phil probably is a good person to ask.