Quote from: bathrobehero on June 19, 2017, 05:05:15 PM

Quote from: hungrybits on June 19, 2017, 05:01:43 PM

Seems like you guys suggest running it directly with the Molex chain that came with the Lepa.

I was told that the Molex chain it came with isn't standard (it looks exactly like the burnt end on the link pic he posted to the other thread as it came from same Lepa model).

If I run the 3 PSU Molex chain cables, I can only run 3 1080 TI cards if each cable is dedicated to one card. The 4th card would have to be either be connected to a Molex > sata adaptor to the PSU sata chain cable, or share a cable with another riser (2 risers on this cable).

Looked online don't see an extra molex cable sold. Any ideas or solutions?

Also, how would the pcie cable connector look, or where would it plug as it doesn't seem to come with one. I'm rather new at this and have trouble identifying the right cables.

Using 3 cards on 3 separate molex chains and the 4th card with a sata#molex should be fine.

Try it, run them for like half an hour and check if they get hot where the others have burned.

Hi Bro,

I'm having the exact same issue with this 1200W PSU: https://www.bequiet.com/en/powersupply/477
Could you advise how I can connect sata connector on the riser to this PSU, I used the drives port on the PSU for 2xGPU only and the PSU cable burned out. I'm not sure whether my PSU is being degraded.Thanks