Quote from: Wuniek on June 20, 2017, 06:21:51 AM

Quote from: mezerwi on June 20, 2017, 02:44:39 AM

The miner wont start. (suspect issue with fifth card so disconnect one of the 470 and run with 4 card including the 560, still wont start)
https://s12.postimg.org/490qdflm5/20170620_102535.jpg

Miner is finding 5 cards so you are few steps further than most users that have problem with boot. I see you already start playing with over clocking options and changed power stage to 0! :

Quote

- powerstage - lower value = lower wattage, 7 is max power, 0 is minimum power but it will almost for sure freeze your rig.
Try lowering until it becomes unstable, but be around rig to reboot it if it will freeze

. 4-6 are optimal values

You also started claymore 8.1 that is not happy with your custom OC settings...

Delete this rig add it again don't change anything beside choosing miner and try it again.

What kind of PSU you have because setup like this will take 950-1100W from the wall without modifications, my 5 cards rigs are drawing 1050W and I`m using two 750W PSU for each rig.

with 4 cards and powerstage 0, no problem arise. so its out of the equation. PSU? non issue, i use more than adequate with power meter too.

Why claymore 8.1? because it give more hash speed compare to 9.4 and 9.5

Ive further tested the card on windows environment with either claymore 8.1/9.4 and 9.5 all no issue (12++ mhs)

then i create new Smos account and tested only 2 card of the 560, cant run too.
this setup i left the powerstage to 7 and stock clock.