Quote from: Nexillus on June 21, 2017, 01:27:41 AM

Quote from: Brucelats on June 20, 2017, 11:27:52 PM

Quote from: Nexillus on June 20, 2017, 06:01:20 PM

Quote from: UberDaemon on June 20, 2017, 04:43:21 PM

Quote from: Nexillus on June 19, 2017, 11:45:47 PM

I should probably rephrase. I have all 6 GPUs on risers, the only time it does not post is when I have 2 of the x16 slots with the risers in them. I will double check and make sure they are all the same gen type. I had it on auto first but when I did, it wouldn't even boot past one card. I'm to the point I may just reset the MB bios via cmos and start fresh.

Use all 3 of the x16 slots, then begin populating the x1 slots beginning with the one closest to the CPU and moving away from it.

I did not try this but I did get it working.

Motherboard changes to get it to post:
DMI max gen 2
pciex16_1 link gen 2
pciex16_2 link gen 2
pcie spread spectrum clock disable
pcei speed gen 2
restore ac power on
hd audio controler disable
post delay time 0 sec
above 4g decoding enable

Current slots in use (check MB manual)
PCIEX1_1
PCIEX16_1
PCIEX1_2
PCIEX1_3
PCIEX1_4
PCIEX16_3

If I use the PCIEX16_2 slot claymore miner will not detect the GPU in that slot, skipping it posts and all 6 are registered.

Link to the stats
CC: 100
Mem: 1275
dcri: 20
Watt: 115 per card
802 watts from the wall

Quote from: nothanksdevnull on June 20, 2017, 12:07:36 AM

Just wanted to say thanks for making this! Happy to donate if you have an address to send it to. I initially planned on running Windows but was having sporadic hashing rates. I switched over to this and it's been running perfectly.

Also wanted to say that I was able to run 8 1070 GPUs with no issues on ASUS PRIME Z270-P motherboard. To get the additional 2 GPUs on this board, I'm using two m.2 to PCI-e adapters.

I BEG YOU, what are your BIOS settings and version?* PLEASE!!

I cant get my 5th gpu to work. I use all GTX 1070 and Ubuntu 16.04 desktop-

I also have Asus Z270-P but simply something is done wrong Sad

Basically either i cannot enter ubuntu, i am stuck after bios screen or i manage to get in but system doesn't show 5th gpu

I am currently running Asus PRIME Z270-A BIOS 0906 on my board. I updated via the Ez update through the internet.

Also check out this youtube video on step by step for all the changes I made. https://www.youtube.com/watch?v=DR-FkpU2KfI

Also according to several others may need to fill all your x16 slots (in my case I did not and it has booted fine with 6 GPUs)

Also forgot to add, I unplugged power, unplugged all risers,removed cmos battery to reset BIOS before applying the above changes. Then I plugged it all in after changes and booted.

Thanks for helping Nexillus

Let me know if you get it working Brucelats