Quote from: TicTacKiller on June 28, 2017, 11:16:48 PM

Hey guys, first time posting and just trying to get into the whole mining thing.
I have a strix rx 480 8G doing about 24mhs for ethereum and 700mhs for sia using claymore.

I keep reading of people getting at least 28 mhs by flashing with copying the 1750 strap to 2000. I've tried this but it made no difference for me, I've been playing with mem and core frequency. I can't get higher than 24 for ethereum and 720 for sia. It only goes down with different settings.
I've also been messing with the -i command for claymore and that too doesn't get me past 24mhs.

Any help would be appreciated.
Thank you!

As I have stated in other hashrate tweaking posts...
When you are trying to get the best out of your card and see how fast it can mine, you don't use dual mining.
You have to test the card with ETH only and see the maximum hashrate it can get (with bios mod, and core speed-voltage, memory speed etc)
Once you are satisfied with the results, then you jump into dual mining.
The ETH-SIA combination is dropping the ETH hashrate a lot. If you try ETH-DCR you will see higher ETH speeds.
Again... tweak,mod,push your card using 1 coin only (ETH for your card) and when you are happy, switch to whatever dual combination you are happy with.