Re: Cheapest 'PDU' thats at least 12kw?

Quote from: bathrobehero on July 02, 2017, 04:55:23 AM

Why not just split the power between several smaller circuit breakers, like 16A?

That's way cheaper than a big PDU especially if you're not interested in PDU features.

a 20 amp 240 which derates to 16 amp does 3840 watts or 3 units at 1100 watts he needs

four of them to do 12 units. he needs 12 receptacles 3 for each circuit breaker a lot of hard wiring your way.

these items work at a low cost 3 hard wired receptacles can do 15 units.

http://www.ebay.com/itm/NEMA-L6-30R-Turn-Twist-Lock-Locking-Receptacle-Outlet-30A-250V-2P-3W-L6-30-/162134424426?
http://www.ebay.com/itm/HP-Hewlett-Packard-228481-002-Module-PDU-Control-Unit-200-240VAC/261469140311?
http://www.ebay.com/itm/HP-modular-PDU-extension-bar-p-n-228480-002-BEST-PRICE/272270265827?
http://www.ebay.com/itm/LOT-of-20-IEC-C13-to-C14-jumper-cord-cable-5-ft-length-/232389461182?

I wrote this up for another person
I linked a solution to him below:

https://bitcointalk.org/index.php?action=post;quote=19886311;topic=1993052.0

Quote from: philipma1957 on July 01, 2017, 11:38:39 PM

Quote from: ljb281 on June 29, 2017, 05:37:54 PM

Hope I am posting the in the correct forum.

I need help to wire my 10 L3+ Antminers.

I would like a diagram that I can present to an electrician.

The farm will be setup up in my home in USA so 120v with standard 15 amp breakers.

The diagram should be scalable for when I inevitably add more miners.

I'm not opposed to adding bigger breakers, safety first efficiency second.

I will compensate you with BTC for the diagram if it is legit.

Thanks in advance.

here you go you want 2x 30 amp 240 volt put in

use 10 gauge wire use 2 pole breakers.

have two l6 30r one for each circuit

http://www.ebay.com/itm/NEMA-L6-30R-Turn-Twist-Lock-Locking-Receptacle-Outlet-30A-250V-2P-3W-L6-30-/162134424426?

use 2 pdu's each has 4 plugs and can do 24 x 240 volts =

http://www.ebay.com/itm/HP-Hewlett-Packard-228481-002-Module-PDU-Control-Unit-200-240VAC/261469140311?

use a few of these on each pdu
http://www.ebay.com/itm/HP-modular-PDU-extension-bar-p-n-228480-002-BEST-PRICE/272270265827?

lastly get some of these

http://www.ebay.com/itm/LOT-of-20-IEC-C13-to-C14-jumper-cord-cable-5-ft-length-/232389461182?

1 30 amp circuit breaker to 1 30 amp receptacle to 1 24 amp pdu to 2 breakout extensions to your 6 power cords

do this one time for 6x 800 watt l3's
do this two time for 12x 800 watt l3's

if you want to send me coin here is an ltc address

LWdix5Rxpqmzk6w7xjZjq7Vvm9TBquDYH8