Quote from: Greek_miner_ on July 06, 2017, 03:24:01 AM

Quote from: achalmersman on July 06, 2017, 01:48:28 AM

Quote from: Greek_miner_ on July 06, 2017, 01:02:10 AM

Hi everyone. I have an Asus Prime Z270-P running great with 2 EVGA 1070's. I want to run it with 8 cards which I have. Should I reimage the USB stick or will it be fine with installing the cards with risers and just running it again? I'm also assuming I have to run it without a monitor hooked up.

I have that exact board and have been running 8 cards for several days now. You should be fine as long as you have the onebash file configured correctly for the new cards already. Just shut down, add cards, and reboot. You will of course need 2 m.2 adapters if you haven't got them already. I am running 6 1070s, 1 1060, and 1 970. Right around 224 MH/s. Could be closer to 230 if I could figure out how to overclock the Maxwell card.

That's great news. Yes I do have all adapters. Did you have a monitor hooked up or did you ssh in to check on it? Thanks I really appreciate this.

Although the posts in this thread using SSH and Screen are helpful I have not gone through that. I have the rig in my basement with a monitor hooked to it as well as Teamviewer installed on all my PCs and cell phone. With Teamviewer you can remote in from anywhere although it uses more system resources.