Quote from: TeamWinMiner on July 11, 2017, 02:35:08 PM

Quote from: abudfv2008 on July 11, 2017, 01:01:26 PM

Quote from: TeamWinMiner on July 11, 2017, 11:54:30 AM

- Dcri settings during optimization/benchmarking different dcri values are being tested automatically (0, 30, 70 and 100) to make sure profit is maximized.

0 30 70 100 is not enough. These works for 1060/1070, usually somewhere around 35-50-60. But for 1080/1080ti 200+ ... 400+ is more profitable nowadays (LBRY usually ~480-500 on 1080Ti)
And as for AMD cards and GTX1060 dcri should be changed very presicely. E.g. right now on 1xFuri Eth+DCR dcri30=2.40 dcri36 =2.69$, dcri40 = 2.59 dcri50=2.30
First to implement realtime optimizing of dcri setting will get many users.

Thank you very much for the feedback and pointers.
(1) LBRY currently not supported. We have added to the wish list though

(2) More dcri values - will add more values to the optimization. Naturally, the more values we add the lengthier the benchmarking process will be. This is especially true due to dag size (e.g. optimization for ETH +DCR is not the same as optimization for UBQ+DCR).
(3) Real time dcri optimization we currently do that for a limited number of values. Including all possible values would make bencmarking run forever...

. Nevertheless, point taken, we will think of a creative way to address this.

Thanks again!

1. Sia. Pascal, kessak, nist5 etc also should be added to maximize profit. Without them you won't beat modded versions of NHM.
2. Benchmark can be done in one attempt if you would be able to change dcri in real time. Anyway manual input for some algo is ok.
3. I think that with dual mining 3 settings are just the points to start closer to the optimum. After start real time optimizing should take place.