Quote from: Munhenhos on July 14, 2017, 01:57:25 PM

Quote from: Zyxi on July 09, 2017, 10:12:28 AM

I'm new to mining but am having a tiny issue so wanted to see if I was doing something wrong.

I have 3 GPU's in my system and all of them are stock RX 470's. While running it shows GPU 0, 1, and 2 all working fine. The odd thing is when it shows the temperatures and fan speeds it will only show this for GPU 0 and GPU 1. I have tried using -gmap 012 and also -gmap 210 and it still only shows 2 of the GPU's. See below:

ZEC: 07/09/17-03:04:40 - SHARE FOUND - (GPU 2)
ZEC: Share accepted (156 ms)!
ZEC: 07/09/17-03:04:41 - SHARE FOUND - (GPU 2)
ZEC: Share accepted (156 ms)!
ZEC: 07/09/17-03:04:45 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (156 ms)!
ZEC: 07/09/17-03:04:51 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (156 ms)!
Pool sets new share target: 0x000e3b07 (diff: 4605H)
ZEC: 07/09/17-03:04:56 - New job from zec.suprnova.cc:2242
ZEC - Total Speed: 822.119 H/s, Total Shares: 36, Rejected: 0, Time: 00:04
ZEC: GPU0 279.209 H/s, GPU1 272.246 H/s, GPU2 270.664 H/s
GPU0 t=71C fan=46%, GPU1 t=69C fan=27%
ZEC: 07/09/17-03:05:12 - SHARE FOUND - (GPU 0)

From reading the documentation this should be showing all three GPU temps and fan speeds, so I wanted to ask what I am doing wrong that is preventing this from happening.

Thanks in advance for the help!

try a dummy plug.

Check if crossfire is enabled. If yes, disable it...