Quote from: metacrypto on July 19, 2017, 02:51:24 PM

Quote from: tcsee on July 19, 2017, 02:30:26 PM

Quote from: eagleye on July 19, 2017, 02:13:22 AM

You need to modify the configuration on your main page and help page.

When using ethminer there are two switches. the -G you mention is only for AMD based GPUs best performance.
changing the -G to
-U is the configuration for Nvidia GPUs. I think some NOOBs are confused by this. This is only for use with ethminer and not with claymore.

Best nvidia GTX 1050/60/70/80 config is as follows

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

ethminer --farm-recheck 500 -U -F http://noobpool.com:8888/0x/ --cuda-parallel-hash 4
pause
all in a .bat file running windows 10 and latest drivers

eagleye, for nvidia card 1070, any difference with using ethminer vs claymore?
I'm using claymore currently, avg hash ~26MH/s. If switching to ethminer, any idea how much % jump in hashrate?

Bump up that memory clock speed man! You should be around 30-31mh/s with your 1070. But ethminer and claymore are both pretty identical, especially with the new 9.7 claymore that just came out. Both claymore and ethminer were optimized recently and giving out another 1mh/s or so.

Ditto on metacrypto's comment push up the memory clock speed. I run 1070s from a few different manufacturers and have them dual mining sia, decred and/or lbry at around 29mh/s for eth (at around a 40 dcri). The actual values vary by card, but on average I have the card memory clocked up to +400 and power set to 70% limit. You'll have to see what works for your cards, but for me its a good mix between hashrate and power consumption.