Quote from: gyoztes on July 19, 2017, 03:53:10 PM

Quote from: Maxximus007 on July 19, 2017, 03:25:00 PM

Are you using the new V0018? Did you made a new img, or just used a new oneBash? What version did you have before? If you used V0017 or before, perhaps you did not change the autotemp file? The first version had it's own power limits set at 125W.

Can you please try the following:
SSH into your rig or open a guake terminal, and enter:

Code:

sudo nvidia-smi -pl 60

nvidia-smi will give you output, probably telling that the power limits are now set to 60 W. If that's the case, at least you know that setting powerlimits is possible, and it's perhaps the above.

Thank you for the fast reply! Yes I use the newest v18 with the new 1bash. If I set what you mentioned before, it works well. (I set it to 100 because I use 1070 cards.)

My experience: if I set it in the 1bash - and monitor it in another terminal - it works UNTIL the dag reading's end! And after this, it is changing to 125.

In the 1bash it is in the line 522 and (as I see well) there is no setting after this line ith this parameter.

I set the all of the individual card settints to 100 too but set no to induvidual_powerlimit on line 133 and all power limit started from 243 to 100 too (form nicehash but now I do not use it yet).

I try to set on/off the temperature control in line 51 but it is not changing the problem.

What is yor next idea?

Thank you!

Okay, so you are using the autotemp, but did set INDIVIDUAL_POWERLIMIT="NO" ?
This can give a problem, to set autotemp correctly it needs this set to YES.