Quote from: Optimizer on July 20, 2017, 04:08:43 PM

I am unsure, but if Sidehack says it worked for him, it is possible. In my experience though, you want to load these supplies around 50-60% for peak efficiency.

-Optim

I think his issue was that the PSU was not cutting-off if the miner drew too much power, so he recommended having the PSU much closer to the 80% mark to make sure that if there was a power surge in the miner that the PSU would cut out and not cause any smoke/fire issues on the L3+.
In either event, im probably better off using my Seasonic 1000W PSU, that would be 80%. I don't have anything as low as an 850, but that would be like 95% anyhow, probably also not good.