Quote from: bclcjunkie on May 05, 2013, 02:49:30 AM

pinwheel, has it been working well for you so far? so we just need to use 2 wires right?

Quote from: Pinwheel on May 04, 2013, 02:37:28 PM

Quote from: phiz on May 04, 2013, 11:53:22 AM

Quote from: michelet on May 04, 2013, 06:20:02 AM

Quote from: bclcjunkie on May 04, 2013, 01:19:58 AM

Thanks! Appreciate the answer!

Quote from: lan787 on May 03, 2013, 05:59:58 PM

Quote from: bclcjunkie on May 03, 2013, 04:03:08 PM

hey guys,

can anyone point me in the right direction in terms of electrically wiring this board?

https://docs.google.com/document/d/1VMO3VfIBy3KIwUaaQ8XhKrSVEbXeeMEqsVhhk6Bz9io/edit?pli=1

so the doc says this:

1. The two poles for the positive polarity are identical when cabling from the PSU, so are those for the negative polarity.

i'll be getting myself a psu with 12v/10a output so when i bare the wires, how will i know which wire goes into which hole? the picture below belongs to LainZ and i'm trying to figure out how to wire the board when it arrives...

look at another side of the blade. You will see "+ + - -" marks. So + goes to + and - to -.

Take a look here: https://bitcointalk.org/index.php?topic=178275.msg1928057#msg1928057

Is it really necessary to loop back both terminals like this? I thought friedcat had said these were for chaining boards (ie. are connected already on the PCB). My plan was to use a 6 pin PCIe connector from an ATX PSU and simply twist the three wires together to connect just one +ve and -ve input.

2 wires will work the same, I connected first all 4 points, but now changed to two wires

yes, two wires working perfect, what I have is very strong wires, no any temperature rise have been observed on wires iteself. I'm mining and testing it for about a week now. Also fixed 3 USB fans for cooling. Weather is really hot here. Miining around 10200 mhs on one blade and 9800 mhs on another. Probably will do some overclocking next week. All well, working perfect.

One thing is, it seems miner talking to stratum proxy on http and there is no way to change it, maybe in proxy it self there is some way around, but I doubt that. It is important task to get ASICminer work with stratum proxy. Perhaps friedcat can bring so clarification. Most pools moving on stratum now and charging higher comission for those who mine on getwrok servers.