The miner on the windows rig runs very good as well, but here the monitoring dosen't work more than 1.5 hours.
When I restart the system everything works as it should. Most of the time some fan speeds are shown as 0% despite them running, but thats no big deal to me.
But after about 1.5 hours (sometimes 1, sometimes 2) the monitor loses connection to this rig. The rig still is connected and mining, can be pinged...all good.
I run the monitor on the rig itself - but even if a use a different PC in the same network it makes no difference.
Both rigs have a fixed IP by the router, I tried with windows firewall completely turned off but no change.
Before I was using v9.5 and only had that windows rig and monitoring worked without problems for days. The problems came with the update to v9.7.
I did not use v9.6. And using the moitor from v9.5 shows the same behavior.
Same exact problem here. Running ASUS Strix gaming MOBO with 6 ASUS Strix 1060s. Monitor stops / displays erroneous data (e.g., showing fans at 0 speed or temperature at 0C, but fans still working and temperature still in good range on the actual cards), then hours to a day or 2 later, rig actually stops hashing.