Quote from: redargon on July 27, 2017, 10:25:26 PM

Hi MPH Admin,

I have been mining the multi-port scrypt algo on your site for a week or so and have autoexchange set to Ethereum. All the scrypt coins are exchanging fine except for SXC. It's been stuck on "credited for autoexchange", but never moves to "on exchange". There are about 2000 coins waiting. Any ideas?

Thanks in advance.

SXC can't be exchanged to ETH

Here's auto exchange chart. (need login)
https://miningpoolhub.com/?page=account&action=autoexchange
SXC is only available in Yobit. And pool does not allow ETH exchange on Yobit exchange site.
Yobit behaves really strange sometimes, They do maintenance wallet for few months and lock coin disabling deposit/withdraw. I try to minimize exchange currencies in Yobit.

Change exchange coin to Bitcoin, then it will be exchanged.

Quote from: tf2addict on July 27, 2017, 11:17:15 PM

I'm having very spotty runs with Mining Pool Hub. I'm buying hash power from NiceHash. I've had some runs for ETH where I've made 8-10% and I've had a few where I lost a few % and I had one where I lost more than 10%. I'm currently doing two orders for Zcash and despite running with a very low price it looks like I'm going to lose maybe 15-25%. The only thing that was really different with my huge loss runs were I ran at a high speed limit. Not sure if that's a problem or not.

And why does the Sharerate meter on MPH max out at 1?

Limit the hashrate and mine longer. It will be too lucky or too unlucky if you mine very short period of time.
Sharerate is useless info in pool. That is not accurate. I'll remove that.

Quote from: chocobo_rider on July 28, 2017, 12:54:50 AM

@miningpoolhub is autoexchange working? i have many coins "credited for autoexchange" for at least one week. I have autoexchange set to Ethereum, and the stuck coins are:

Dash
Digibyte-Qubit
Expanse
Globalboosty
Maxcoin
Monero

Thank you in advance for your help. My USER ID is 56735

I found that you've already changed auto exchange coin to bitcoin now.
I'll check later when it happens again.

Most times coins are not sent when amount is small.

Quote from: jackbox on July 28, 2017, 02:11:31 AM

Quote from: chocobo_rider on July 28, 2017, 12:54:50 AM

@miningpoolhub is autoexchange working? i have many coins "credited for autoexchange" for at least one week. I have autoexchange set to Ethereum, and the stuck coins are:

Dash
Digibyte-Qubit
Expanse
Globalboosty
Maxcoin
Monero

Thank you in advance for your help. My USER ID is 56735

Me too. I have had coins stuck for over a week.

Ethereum
Maxcoin
Zclassic

Tell me your user id.

Quote from: Galletera on July 28, 2017, 07:30:40 PM

Any plans for adding HUSH (Equihash)?

Quote from: z0n0 on July 29, 2017, 05:00:31 AM

@miningpoolhub
any ETA on when will you be adding new coins in your pool?

Btw - thanks for fixing email notification, works fine.
Cheers.

I'll add coins after I finish BCC distribution, DB optimization, one-page worker view, integrated worker email notification for overall coins, zcoin hardfork preparation.
Sorry for late.

Quote from: stna1981 on July 30, 2017, 10:42:14 AM

Thats what I did, my rig did not mine during night but I got no mail... or does it only work for hub workers?

Please tell me your id and coin. Let me check.

Quote from: z0n0 on July 30, 2017, 06:14:29 PM

How can I check the total amount of mined coins for specific coin? Where to find the total payouts?
Thanks.

You can see daily earning at each pool's dashboard, detailed payout transactions at Transactions page. Filter "Debit_AP" or "Debit_MP" and you will see payout transaction info.

Quote from: BitBot.V2 on July 30, 2017, 06:56:22 PM

the difficulty rates on the profitability api is different the the networkdiff on the pool JSON page which are both different from the difficulty displayed on the dashboard/pool gui, is one more up-to-date or refreshed more frequently or are they just updated at different times?

http://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics&hardware=nvidia

https://verge-scrypt.miningpoolhub.com/index.php?page=dashboard

https://verge-scrypt.miningpoolhub.com/index.php?page=statistics&action=pool **JSON link**

api may show cached data. upto 30 minutes late, so you should check about 15 minutes interval.
Also dashboard and pool page is not showing realtime values. It is short time cached.

Quote from: dodopool on July 31, 2017, 03:40:30 AM

Static diff does not work and your vardiff algorithm is buggy, (for digibyte-skein) at least.

setting

Code:

-p d=1.536

works, for a while and sets the difficulty at 1.536 and then vardiff kicks in and changes it.

vardiff keeps increasing the difficulty until the miner submits nothing for a a few minutes. After not submitting shares for a few minutes vardiff drops the difficulty a notch, and I can see 1-2 shares if it gets lucky, and then bumps up difficulty again -> no shares -> lower a notch -> 1-2 shares -> increase -> rinse and repeat.

in 2 hours of mining with same test hardware, the block factory earned 120 DGB while mining pool hub earned 14 DGB, this is fudged up. (Yes, 120 vs 14 it is not a typo)

In the test hardware there is a mix of 1080/1070/1060s and vardiff setting the difficulty to something over 8, even 1080(~1GH) cannot find a share. I'm curious what the vardiff algorithm is targeting for..

Sorry static diff is temporarily disabled due to misuse of some users attacking server.
I'll change some and open it again.

What is your total hashrate anyway? 14 is quite low even considering that PPLNS penalized your shares.

Quote from: chocobo_rider on July 31, 2017, 05:04:22 AM

I'm using

Code:

sgminer.exe --api-listen -k myriadcoin-groestl -o stratum+ssl://hub.miningpoolhub.com:17005 -u juanse83.phoenix -p x --gpu-threads 2 --worksize 64 --intensity d
ccminer.exe -a myr-gr -o stratum+tcp://hub.miningpoolhub.com:17005 -u juanse83.phoenix -p x

And on sgminer i get:

Code:

[23:58:58] Started sgminer 5.6.1-nicehash-51
[23:58:58] * using Jansson 2.7
[23:58:58] Probing for an alive pool
[23:58:58] hub.miningpoolhub.com slow/down or URL or credentials invalid

ccminer also fails to connect

Quote from: KaydenC on July 31, 2017, 02:33:11 PM

My stratum connection has been spotty today. It keeps going on and off for 5-30 mins at a go, bringing down most of my rigs. However there's sometimes 1-2 still mining, but with the other rigs unable to connect. Anyone else facing this issue?

Is it happening still?
There was server overload issue.

Quote from: RSO_ on July 31, 2017, 03:43:01 PM

I recently tried out MiningPoolHub for a bit, ended up mining Maxcoin for a while and turned off the Auto Exchange feature for that coin. After failing to setup my offline wallet for it, I decided to just exchange the coins on MPH. So reactivated the auto exhange, moved the coins over to 'credited for auto exchange', then they eventually disappeared. The problem is they haven't reappeared in any other currency! I only have BTC and ETH wallets with any amount in them and both are negligible amounts that total about 1/4 of what Maxcoin I had - but they were already there anyway. I don't have anything setup for auto withdraw. It's been about 4 days now and I'm thinking the coins aren't going to appear... Any clue what happened?

Have you checked ethereum and bitcoin's transactions? Maxcoin is quite cheap and it would be negligible amount if it's exchanged to BTC or ETH.
Tell me your id if it's not resolved yet. I'll check.

Quote from: igotek on July 31, 2017, 03:54:30 PM

where is Phoenixcoin(PXC) pool ?

I have been mining from yesterday. Everything was fine. I will cash out but the pool web page not working any more Huh

?

Phoenixcoin pool is closed. I announced pool close for few weeks.
I am going to distribute exchanged BTC to each account according to their PXC.

Quote from: OverEasy on July 31, 2017, 08:21:09 PM

After hours and hours (and hours) (and days) I finally decided to ask for help.

I want to optimize my rigs for MPH and coin switching -

My rigs are all Ubuntu 16.04 with AMD drivers and they work great using Genoil or Claymore and just hitting the MPH ETH port.

I want to do something like this -

:start
ethminer --farm-retries 0 -G -S us-east1.ethash-hub.miningpoolhub.com:12020 -O username.workername:x -FS exit
sgminer --no-retry -k vanilla -o stratum+tcp://hub.miningpoolhub.com:12019 -u username.workername -p x
sgminer --no-retry -k groestlcoin -o stratum+tcp://hub.miningpoolhub.com:12004 -u username.workername -p x
sgminer --no-retry -k myriadcoin-groestl -o stratum+tcp://hub.miningpoolhub.com:12005 -u username.workername -p x
timeout 1
goto start

I suppose I can use cron to achieve something like this?

The BIG issue is A. I don't know what version of SGminer to use and B. The few I have tried I cannot get to compile.

If anyone is doing this on *.nix with AMD successfully please let me know how.
Also what version of sgminer (or other miner) are you using and compile help. I mean it should be simple to compile this but every version bombs out during make like on Bignum or on SHA256 or something.

Thanks for any help

It's hard to guide compilation.

Use ethminer from https://github.com/ethereum-mining/ethminer
sgminer from https://github.com/miningpoolhub/sgminer which included '--no-retry' option.
Follow the build instruction from that repository.

Also I recommend you to not exclude vanilla algo because there's no vanilla algo pool (vcash) any more in miningpoolhub.